Refurbishment of the Induction Coil
In the ČZ foundry, the following actions were performed:
- Determination of the coil damage extent.
- Conducting the pressure test.
- Documentation of the pressure test.
- Removal of the original fabric on the outer part of the coil around the entire circumference.
- Removal of the original epoxy on the outer part of the coil at the damaged area.
- Chemical cleaning of deposits outside the profile.
- Replacement of missing or damaged micanite spacers at the damaged areas.
- Bandaging the damaged threads with insulation tape.
- Twice impregnation of the inner part of the coil with varnish.
- Installation of new epoxy at the damaged areas.
- Installation of new epoxy around the entire circumference.
- Installation of new fabric around the entire circumference.
Reference:
We approached BV Coils based on the recommendation of our furnace supplier, Inductotherm. Due to leakage of molten metal onto the coil, we needed a quick repair of our 2.5-ton coil according to Inductotherm standards. The coil was flawlessly refurbished and subsequently installed into the furnace by the BV Coils team. Everything, including furnace commissioning, was carried out on a turnkey basis.
- Ing. Prokop Vladislav Division: Foundry of Cast Iron
Need to arrange for the refurbishment of an induction coil?
Please fill out the renovation form
